Cesspool Maintenance Murphy's Cesspool

Comments

Post a Comment

Popular posts from this blog

The Purpose of a Grease Trap

Image
The Purpose of a Grease Trap Grease traps are often called interceptors and grease converters and they have one main purpose, to catch or intercept the grease and solid waste before they enter the wastewater in a septic or sewer system. These grease traps are metal or plastic tank fixtures, attached to plumbing systems, that contain pools of rotting food and waste. Fats, oils, and grease are lighter than water and float to the top of the tanks.  Grease traps have been around since the 1880’s and the technology has remained almost the same since then. They have a tank that acts as a reservoir holding the wastewater and solids that enter the trap. As the wastewater cools, the fat, oil, and grease hardens, and allows the food solids to settle. These solids, being lighter than water, float to the top of the grease trap. The wastewater is forced through the grease trap and out to the septic or sewer system. The fat, oil, and grease remain in the tank increasing in volume...
Read more

Dry Wells | Long Island Cesspool & Septic Services | www.NYSeptic.com

Image
Dry Wells Dry wells are drainage structures that leach rain water from parking lots, roads, buildings, roof water, bridges, or a house roof or driveway into the ground. Home dry wells can also be utilized to leach laundry water into the ground. They can consist of precast concrete ring or multiple rings depending on the capacity needed or the depth which is needed to reach good sand for sufficient drainage. These precast rings are made in different diameters that also effect drainage capacity. On top of the precast ring or rings is a top which can be a dome or a slab with a smaller access hole in it. That hole is covered with either a steel manhole cover and brought to grade for access or a concrete cover that is buried below ground. If the cover is below ground, it will eventually need to be accessed at some point in it's life for maintenance. Dry wells are very similar to a cesspool with two key differences. One difference is obviously what waste water it's being us...
Read more

How a Septic Tank Works | Long Island Cesspool & Septic Services | www.NYSeptic.com

Image
How a Septic Tank Works The septic tank is defined as “A tank in which waste matter is decomposed through bacterial action.” Today’s septic tank is a watertight box usually made of precast concrete, concrete blocks, or reinforced fiberglass. A septic tank is a small, on-site treatment and disposal system buried in the ground. the septic system has two main parts, one - the septic tank and two - the soil absorption area. When waste water from your home enters the septic tank this is what happens: 1. Organic solid waste floats to the surface and forms a layer of what is commonly called “scum.”  Bacteria in the septic tank biologically digest and convert this material to liquid. 2. Inorganic solid materials and the by-products of bacterial digestions sink to the bottom of the tank and form a layer commonly known as “sludge.” 3. There’s only clear water between the scum and sludge layers. It is this clear water – And only this clear water – that should overflow ...
Read more